5606.png

CS6

The CS6 incorporates the same 6.5-inch full-range loudspeaker (as the C6) in a black or white paintable ABS surface mount enclosure. It also has a more focused dispersion than the smaller CS4. It contains a proprietary Tru-Phase™ waveguide that produces a consistently wide conical polar response up to 16 kHz. The CS6 features a genuine coaxial design using separate magnets for the LF and HF drivers for reduced distortion and high sensitivity, thereby permitting up to 3 dB greater output level while requiring up to half the amplification power of competing products.

Easily outperforming loudspeakers of a larger size format, the CS6 provides high power handling, high sensitivity and realistic sound reproduction. This loudspeaker is equipped with a built-in autoformer, allowing large numbers of distributed loudspeakers to be powered from a 70V or 100V amplifier output. A convenient front-accessible power tap switch is hidden behind a rotatable logo. Installation is simple and flexible using the included multi-angle pan-tilt bracket which allows low profile mounting and precise positioning of the enclosure in either horizontal or vertical orientation.

Thanks to the internally reinforced, black or white paintable ABS enclosures, zinc-rich epoxy dual-layer powder-coated grilles and brackets, weather-treated drivers, and the included IP56 sealed wiring cover, all standard surface mount models are equally suited for indoor or outdoor direct exposure applications.

SKU: 23a479980ee2. Categories: , .

Additional Information

Dimensions

7.0″ x 11.8″ x 10.7″ (177 x 300 x 272 mm)

Frequency Response

65 Hz – 13.5 kHz

System Sensitivity

120 dB

Dispersion Angle

120 degrees conical

Driver Complement

1 × 6.5″ LF, 1 X .75 HF

Power Handling

60W continuous @ 8 ohms

Rated Max Spl

108 dB (114dB peak)

Nominal impedance

8 ohms

Autoformer LMT tap settings

30W, 15W, 7.5W, 3.75W (@70V only)

Finish Options

Black or White ABS matte plastic, paintable with dual-layer powder-coated steel grille